• LAAL 1.0.0 WiN MAC-HCiSO-BUBBiX
    May 1st, 2025 ⚡
    Categories:

    LAAL 1.0.0 WiN MAC-HCiSO-BUBBiX-MaGeSY

    LAAL 1.0.0 WiN MAC

    TEAMs HCiSO/BUBBiX | 01 May 2025 | MAC:74MB | WiN:52MB

    ..: AAX Native, AU, AAX AudioSuite, VST2, VST3 :..

    Intelligent look-ahead limiting LAAL stands for Look Ahead Analog Limiter. This is the detection circuit that makes its special sonic characteristics possible – a fully analog delay line (0.2 ms) ‘looks ahead’ with the dynamic transient function to respond intelligently to signal peaks before they occur. This results in responsive peak limiting without harshness or distortion. Achieve your RMS levels and loudness targets while preserving detail, air, and low-end punch. And use its smoother limiting curves and acres of headroom, to bring life to your mix.


    Viewed 10884 By Music Producers & DJ´s.


  • Maximal 3 v3.0.5 WiN-R2R
    April 29th, 2025 ⚡
    Categories:

    Maximal 3 v3.0.5 WiN-R2R-MaGeSY

    Maximal 3 v3.0.5 WiN

    Team R2R | 23 October 2024 | 10.9 MB

    PLATFORM: VST2/VST3/AAX(MOD)

    Maximal 3 is a true-peak brickwall limiter, soft clipper, and broadcast standard loudness meter. Maximal 3 is a loudness maximiser, designed to limit and maximise your track. Featuring both a true-peak brickwall limiter and a variable shape soft clipper, Maximal 3 can increase the overall loudness of your track, without destroying the sonic quality. The limiter features true-peak lookahead detection, meaning inter-sample peaks will never overshoot and clip. With four different modes, and controls for attack and release, the shape of the limiter can achieve anything from transparent limiting with transient preservation, to warm bus gluing or pumping.


    Viewed 75529 By Music Producers & DJ´s.


  • Loudness Limiter v3.0.0 WiN-BUBBiX
    January 11th, 2025 ⚡
    Categories:

    Loudness Limiter v3.0.0 WiN-BUBBiX-MaGeSY

    Loudness Limiter v3.0.0 WiN

    BUBBiX | 04 October 2024 | 32 MB

    x64:(STANDALONE, VST3, AAX) | x86:(STANDALONE, VST3)

    The APU Loudness Limiter is a real-time limiter designed to support multiple loudness types simultaneously. The limiter can be configured to use LUFS, True Peak, RMS, and/or Peak loudness types. This allows you to target multiple requirements simultaneously, such as a specific LUFS target and a specific True Peak target. Internally, the ballistics of the limiter are adjusted to accommodate the different loudness type limiter settings.


    Viewed 25655 By Music Producers & DJ´s.


  • APU Loudness Compressor v2.9.0 WiN-TCD
    September 9th, 2024 ⚡
    Categories:

    APU Loudness Compressor v2.9.0 WiN-TCD

    APU Loudness Compressor v2.9.0 WiN

    TCD | 09 September 2024 | 10.4 MB

    x64: STANDALONE, VST3, AAX | x86: STANDALONE, VST3

    The APU Loudness Compressor plug-in is a compressor/expander designed to support modern loudness types (LUFS, True Peak). Typical compressors operate using only RMS and/or Peak units of measurement. But technology has come a long way since then and we’re overdue for an upgrade.. This compressor uses modern industry standard LUFS units of measurement to provide a far more transparent response which is connected to the way humans actually experience loudness. The entire signal flow of the compressor operates within this more precise understanding of loudness. The plug-in user interface provides a more flexible alternative to traditional threshold-and-ratio style of compressor controls. Instead, source and target ranges of loudness can be configured and the compressor will either compress or expand as needed.


    Viewed 22929 By Music Producers & DJ´s.


  • VisLM v2.xx AU AAX VST VST3 RTAS WiN MAC-R2R
    September 9th, 2024 ⚡
    Categories:

    VisLM v2.xx AU AAX VST VST3 RTAS WiN MAC-R2R

    VisLM v2.xx WiN MAC

    Team R2R | 09 September 2024| WiN: 8.9 MB | OSX: 80 MB

    WiN64: VST/VST3/RTAS/AAX | MAC: AU/VST/VST3/RTAS/AAX

    The most fundamental question in audio production, how loud is it? Simple and yet elusive, with loudness inconsistency and incompatibilities present every day in broadcasts across the world. With detailed, objective loudness measurement, history and logging facilities, VisLM provides a simple, ITU, ATSC and EBU standard compliant* way to measure, compare and contrast loudness during production, broadcast and post production, on the fly or for entire sections of audio.


    Viewed 16850 By Music Producers & DJ´s.


  • Lm1 Native V1.2.0 Aax Vst3 X64 Win R2r

    LM1 NATIVE v1.2.0 WiN

    Team R2R | 19 November 2023 | 3.8 MB

    LM1 – Stereo Loudness Meter

    Our native LM1n Loudness Meter plug-in is an addition to a growing range of loudness and meter plug-ins, and provides you with the all-important basics in loudness metering, leaving only a small footprint on the screen. If you need to deliver content that complies with a certain broadcast standard, LM1n is your perfect solution, whether you work with audio or video and no matter what platform you need to deliver for. In short, you get max simplicity and great-sounding results that will not be rejected when you deliver content for broadcast.


    Viewed 13120 By Music Producers & DJ´s.


MaGeSY TeleGram Subscribe & Stay up to date with all the Posts that are published in MaGeSY MaGeSY Podcast: Subscribe & Stay up to date with all the Audio Posts that are published in MaGeSY MaGeSY Instagram Official MaGeSY-Youtube Official MaGeSY-X Official MaGeSY-Facebook Official MaGeSY-Pinterest Official MaGeSY-WhatsApp Channel Official

Total Posts: ❨ 🎵➡51 ❩ | Paged: ➡ 2

With Adblocker the page loads slower & avoid enhanced new search



ಮ್ಯಾಜೆಸ್ಯ್

MaGeSY ® R-EVOLUTiON™⭐⭐⭐